We Are The Inventor And The manufacture Of The Original Greenhouse Bender. Plus We Supply Phone Support 7 Days A Week To Help You Build Your Greenhouse. The Other Company Copies Our Bender And They Learned The Little They Know From Us. They Don't Answer Their Phone After Hours Or On Weekends, When You Need The Help Most, We Do. 903-497-1158
Quick Hoop Diy Dy Series Bender
Example of hoops built using our Quick Hoop Benders
Save 50% building your Hoop Greenhouse. Bend your own steel tubing Hoop House. Thousands of happy gardeners already have.
Need Help? Questions? Call 903-497-1158
Our DY- Series Greenhouse Hoop Benders Frame Bending Tools were designed exclusively for the Homeowner Doit Yourself gardener. Weighing in at just 10 lbs, less than 36 inches long and. This innovatively simple manual tubing bending tool will amaze you as you bend perfect, smooth bends in steel tubing in under two minutes.
You can expect a whooping 50% to 70% savings when bending & building your own hoops compared to the cost of redi formed hoop greenhouse kits, PLUS, because all of the materials are already available in your local hardware stores, you want be paying those high shipping/freight cost on those heavy greenhouse kits, which these days could cost hundreds of dollars. All Hoop Benders instructions are provided for all hoop bending tools. When faster production is a must ,we offer the "C" Series Hoop Benders for small nursery operations, serious gardeners and hoophouse manufacturing.
Model DY-10 Greenhouse Quick Hoop Bender Produces 10 ft wide Greenhouse Hoops using two 10' 6" lengths of 1 3/8 inch o.d. 17 or 18 gage chain link fence top rail tubing which is sold at all hardware stores.
Model DY-12 Greenhouse Quick Hoop Bender Produces 12 ft wide Greenhouse Hoops using two 10' 6" lengths of 1 3/8 inch o.d. 17 or 18 gage chain link fence top rail tubing which is sold at all hardware stores.
Model DY-20 Greenhouse Quick Hoop Bender Produces 20 ft wide Greenhouse Hoops using three 10' 6" lengths of 1 3/8 inch o.d. 16 or 17 gage chain link fence top rail tubing which is sold at all hardware stores.
Our model number system is quite simple; Each model number begins with one or more Letters which indicate the Series followed by one or more numbers. The letters indicate the bender Series and the numbers indicate the Width of Greenhouse Hoop in (feet) that specific bender is designed to produce when using the recommended size and gauge of tubing specific to that hoop.
For example the "DY"& "C" & "PF" series each having the same three hoop sizes. Each has a 10 ft, a 12ft and a 20 ft hoop size. So what is the difference between a DY-10, C-10 and a PF-10? All three build a 10 ft hoop? YES they do. The difference is the total amount of available bending surface of the specific series.
All of the "DY" series have about 24 inches of usable bending surface which requires about 6 or 7 bending strokes (motions) to complete the bending of one 10' 6" length of tubing. Where as the longer "C" series has about 48 inches of bending surface thereby requiring only 3 or 4 bending strokes, while the "PF" series has 72 inches of bending surface requiring only 1 long and 2 short strokes to complete the ends.
With that said, what is the advantage of having more bending surface per bending stroke? While it is quite easy to bend steel tubing on any of these benders, none the less, it is a physical exertion and if you are planning on bending several dozen hoops on a regular basis the "C" series benders reduce's the fatigue from the bending process. The "PF"reduces it even more, if one is planning on building hundreds of greenhouse hoops, either for their own nursery or perhaps to build greenhouse kits for resale to others the more bending surface the better.